Table of Contents
Advertisement
Operation
4
buttons
5.2 Rear Panel
L AN
HDB T /P oC
3
Number
Name
1
Control ports
● Pressing "OK/MENU" button enters the OSD immedi-
ately. Then the user can navigate using the 4-way arrow
buttons. A new OSD setting is confirmed by pressing
"OK/MENU" button.
● Pressing "EXIT/AUTO" will exit OSD when OSD is
displayed. Pressing "EXIT/AUTO" 5 seconds for auto
switch on/off. When the button LED light on, means
auto switch on.
● Pressing "MIC-/+" button decreases or increases MIC
volume. Pressing "VOL+/-" button increases or decrea-
ses "Master volume".
● Pressing "MIC-" and "MIC+" buttons simultaneously
will resets the switcher HDMI/HDBT output resolution to
720P/60.
● Pressing "VOL-" and "VOL+" buttons simultaneously
will lock/unlock the front panel, these two button LED
will light on when the front panel is lock on.
1
3 4
● LAN: This port is the link for Web GUI control; connect
to an active Ethernet link with an RJ45 terminated cable.
● RS-232: Serial control port, 3P captive screw connec-
tor, connects with a control device (such as a computer)
to control the switcher or other device connected with
the HDBT receiver.
● IR IN: Connects with IR receiver cable (with carrier
wave), to receive IR signals sent by the IR remote or
remote controller of other input/output device.
4
Function description
5/31
2
5
6
Advertisement
Table of Contents
