Remote Control &Ir Operations - Prestel SW-P51 User Manual

5.4 Remote Control &IR Operations
5.4.1 Remote Control
INPUT
HD1 HD2 HD3 DP
VGA AUTO
ADJ RES
OK
Menu Exit
VOLUME
VOL- VOL+ Mute
MIC- MIC+ Mute
MIC
Switcher Remote
5.4.2 IR operations
As IR signal can be transmitted bi-directionally between the switcher and the
HDBT receiver, it is able to use the IR remote to control the switcher or HDMI
source devices.
1) Control far-end device locally
To control the switcher or remote display device by using corresponding
remote controller.
RX
TV Remote
Scaler switcher Remote
① : Press this button to power on to the switcher or set
it to standby mode.
② INPUT: Press these buttons for select the input
sources.
③ ADJ: Press this button for operate VGA input auto
adjustment function;
④ RES: Press this button to select HDMI output
resolution. (Press and hold 5 seconds or more, the
HDMI output resolution will reset to 720p60Hz.)
⑤ Menu operation buttons:
MENU: Press this button to enter in OSD menu.
EXIT: Press this button to exit OSD menu.
OK: Press this button to confirm operation.
UP/DWON/LEFT/RIGHT buttons: OSD value setting.
⑥ VOLUME: Control master audio volume buttons.
⑦ MIC: Control MIC input audio volume buttons.
Scaler switcher Scaler switcher
UTP Cable
RX
16/31
TX 1
TV