Table of Contents
Advertisement
Central Processing Unit (CPU)
The motherboard comes with an onboard Intel
Celeron™ Quad Core Processor and a specially
designed CPU heatsink.
System memory
Overview
This motherboard comes with two Double Data Rate 3 (DDR3/DDR3L) Dual Inline Memory
Modules (DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched
differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for
better performance with less power consumption.
J3455M-E
J3455M-E 240-pin DDR3 DIMM sockets
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
•
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
•
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
•
Due to the chipset limitation, we recommend that you use single-sided 4GB or 8GB,
or double-sided 8GB DDR3 per DIMM slot. The maximum memory for the two DIMM
slots is 16GB.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
•
Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
ASUS J3455M-E
®
DIMM_A1
DIMM_B1
Attention: If only one DDR3
memory module is going to
be installed, be sure to
install it in DIMM_A1.
J3455M-E
J3455M-E CPU
Channel
Channel A
Channel B
Intel J3455
Sockets
DIMM_A1
DIMM_B1
1-7
Advertisement
Table of Contents
