Table of Contents
Advertisement
15.4 Running the intensive
appliance care pro-
gramme
You can run the intensive appliance
care programme to remove any stub-
born dirt deposits in the appliance
and odours after a downtime of more
than one month.
Notes
¡ The intensive appliance care pro-
gramme runs for approximately 4
hours and must not be cancelled.
¡ When you run the intensive appli-
ance care programme, you need
the original appliance care
product.
→ "Accessories", Page 28
WARNING
Risk of injury!
The use of non-original spare parts
and non-original accessories is dan-
gerous.
Only use the manufacturer's ori-
▶
ginal spare parts and original ac-
cessories.
Starting the intensive appliance
care programme
Requirements
¡ The appliance care programme is
ready.
→ "Preparing for appliance care",
Page 35
¡ The appliance care programme is
now called up.
→ "Calling up the appliance care
programme", Page 36
Press
.
1.
a "CP2" and the programme dura-
tion alternate on the display.
ATTENTION! The functionality of
2.
the appliance may be impaired if
you use the wrong quantity of fab-
ric softener, detergent, care
product or cleaning agent.
Follow the dosage recommenda-
▶
tions from the manufacturer.
Pour a bottle of the appliance care
product and approx. 1.5 litres of
hot tap water into the condensa-
tion container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
3.
so that it locks into place.
Press
Start/Reload .
4.
a The appliance care programme
starts and a signal tone sounds.
a After around 3 hours, the appli-
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
Pull out the condensation con-
5.
tainer horizontally and empty it.
Pour approx. 1.5 litres of hot tap
6.
water into the condensation con-
tainer.
Carefully swing the condensation
7.
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive
appliance care programme
Pour approx. 1.5 litres of hot tap
1.
water into the condensation con-
tainer.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press
Start/Reload .
3.
Appliance care en
37
Advertisement
Table of Contents
