Honda CBR1000RR 2018 Owner's Manual page 199

Make sure that the lug on the brake
2.
caliper bracket is positioned in the slot on
the swingarm.
Swingarm
3.
4.
Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft).
Brake caliper
5.
bracket
Slot
Lug
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tyre Puncture
Adjust the drive chain.
Install and tighten the rear axle nut.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
Removing Wheels
u
P. 158
2
195