Honda CBR1000RR 2018 Owner's Manual page 146

Removing & Installing Body Components
# Removal
Make sure the ignition switch is in the
(Off) position.
Remove the front seat.
1.
Unhook the rubber strap from left side.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
142
Battery
u
P. 143
2
# Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
P. 76
2
P. 127
2
P. 196