Energy Saving - DeLonghi NESPRESSO VERTUO LATTISSIMA Instructions Manual

Hide thumbs Also See for NESPRESSO VERTUO LATTISSIMA:
Table of Contents

Advertisement

C) PROGRAMMING THE HOT FOAM VOLUME
1. Press and hold the hot foam bu on for three seconds, until it starts flashing.
2. Once the desired quantity is reached, press again hot foam bu on to save
the new programmed volume. Volume can be reprogrammed from 80ml
minimum to 200mL maximum.
Note: If you wish to come back to the default factory se ings (200ml) see "Re-
set to factory se ings" section.
Note:
• During the hot foam function it is possible to program a co ee. When the
co ee bu on lights up, press it. When the milk beverage is completed, cof-
fee will automatically start brewing. Make sure a capsule has been inserted.
• During the co ee brewing it is also possible program the hot foam function.
When the hot foam bu on lights up, press it. When the co ee is complet-
ed, milk will automatically start to flow. Make sure the milk carafe has been
inserted.
13

Energy saving

The machine can be turned "OFF" at any time (when not in use) by holding
the co ee bu on for three seconds.
Automatic "OFF" Mode: the machine will turn o automatically
a er 2 minutes of non-use.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Env300w

Table of Contents