Location Of Controls; Front View - Sharp XG-NV3XU Operation Manual

Color lcd projector
Hide thumbs Also See for XG-NV3XU:
Table of Contents

Advertisement

Location of Controls

FRONT VIEW

Zoom ring
Lens focusing ring
Cooling fan
(Exhaust vent)
Security Lock Anchor
This projector has a Kensington
Security Standard connector for use
with a Kensington MicroSaver
Security System. Refer to the
information that came with the
system for instructions on how to use
it to secure this model.
Note:
• Be sure to use the Computer
Control cable when connecting
the PC CONTROL terminals.
E-5
Speakers
Remote sensor
Cooling fan (Intake vent)
POWER ON/OFF button
BLACK SCREEN button
(ß/©, ƒ/∂) buttons
SIDE AND REAR VIEW
Carrying handle
COMPUTER RGB
OUTPUT
connector (HD-15)
VIDEO INPUT 1
COMPOSITE
Video: RCA
Audio: RCA
VIDEO INPUT 2
S-Video: 4-pin mini DIN
Audio: RCA
Cautions:
• The exhaust vent, the lamp cage cover and adjacent areas may be
extremely hot during projector operation. To prevent injury, do not
touch these areas until they have sufficiently cooled.
• Allow at least 4 (10 cm) of space between the cooling fan (exhaust
vent) and the other nearest wall or obstruction.
• If the cooling fan becomes obstructed, a protection device will
automatically turn off the projector lamp. This does not indicate a
malfunction. Remove the projector plug from the wall outlet and wait
10 minutes. Then turn on the power by plugging the cord back in.
This will return the projector to its normal mode.
OPERATION PANEL ON TOP OF PROJECTOR
LAMP REPLACEMENT indicator
POWER indicator
POWER
ON/OFF
BLACK
SCREEN
ADJUSTMENT
ENTER button
COMPUTER RGB INPUT 2 connector (HD-15)
COMPUTER RGB
INPUT 1 connector
(HD-15)
COMPUTER RGB
IN 1
IN 2
OUT
1
L
R
IN
1
OFF
IN
2
S-VIDEO
L
R
VIDEO
AUDIO
• PC CONTROL 1:
Use the supplied computer control cable when operating the remote
control as a wireless mouse or when controlling the projector from
the RS-232C terminal.
• PC CONTROL 2:
Use the computer control cable (CTANZ0711CE01) (sold separately)
when operating the remote control as a wireless mouse.
Notes:
• RS-232C does not function when connected to PC CONTROL 2.
• See page 15 for connection.
TEMPERATURE WARNING indicator
LAMP
TEMP.
MUTE button
MUTE
VOLUME UP-
VOL
DOWN buttons
INPUT SELECT
INPUT SELECT button
MENU
MENU button
ENTER
COMPUTER AUDIO INPUT 1
(3.5 mm Stereo Minijack)
COMPUTER AUDIO INPUT 2
COMPUTER AUDIO
IN 1
IN 2
(3.5 mm Stereo Minijack)
AUDIO
WIRED
WIRED REMOTE
OUTPUT
REMOTE
CONTROL INPUT
PC CONTROL
(3.5 mm Minijack)
2
AUDIO OUTPUT
(3.5 mm Stereo Minijack)
ON
(VIDEO/COMPUTER RGB)
MAIN POWER
switch
110-120V/
200-240V~
AC INLET

Advertisement

Table of Contents
loading

Table of Contents