Functions On The Projector; Setting Up The System; Background Level - Sharp XG-NV3XU Operation Manual

Functions on the Projector

On-Screen Display
S Y S T E M
R E S O L U T I O N
H O R
V E R T
L A M P U S A G E
R E M O T E
: S E L .
: A D J .
S Y S T E M
R E S O L U T I O N
H O R
V E R T
L A M P U S A G E
R E M O T E
: S E L .
: A D J .
V I D E O 1 A D J .
B A C K G R N D L V L
I M A G E
A U D I O
S Y S T E M
L A N G U A G E
: S E L .
B A C K G R N D L V L
R E D
B L U E
R E S E T
: S E L .
: A D J .
S E T U P
8 0 0 @ 6 0 0
F R E Q 3 7 . 9 KHz
F R E Q 6 0 Hz
1 2 3 4 H
M O U S E [ ]
A T
MENU : E N D
S E T U P
8 0 0 @ 6 0 0
F R E Q 3 7 . 9 KHz
F R E Q 6 0 Hz
1 2 3 4 H
[ ]
M O U S E A T
MENU : E N D
A D J .
S E T U P
: N E X T
ENTER
MENU : E N D
0
- +
0 - +
: N E X T
ENTER
MENU : E N D

Setting Up the System

Using this function, you can check the input signal and
lamp usage time, and select the remote mouse.
Checking the system and lamp usage time
• Press the MENU button. Select "SYSTEM SETUP" with the
ADJUSTMENT ƒ/∂ buttons. Then press the ENTER button to
change to the picture indicated on the left.
• The current system conditions, including the lamp usage
time, will be displayed on the screen.
• Press the MENU button to select the normal screen mode.
Note:
• In the video screen, the resolution and frequency settings will not be
displayed.
Selecting the Remote Mouse
• Separate settings can be selected for RGB 1 and RGB 2.
• Use the INPUT SELECT buttons to select DATA 1 (RGB 1) or
DATA 2 (RGB 2).
• Press the MENU button.
• Select SYSTEM SETUP with the ADJUSTMENT ƒ/∂ buttons.
Then press the ENTER button.
• Select "REMOTE MOUSE" and then select either "[AT]" or
"[98] "with the ADJUSTMENT ß/© buttons.
• Select [AT] when using IBM compatibles and Apple
Macintosh series.
• Select [98] when using NEC PC98 series (for Japan).
• Press the MENU button to select the normal screen mode.

Background level

• The Background Level adjustment can be used to adjust the
picture white balance for the selected Video Input Source.
• Optimal image quality can be achieved by adjusting the
white portion of the picture to obtain the best color for the
selected source.
Adjusting the BACKGROUND LEVEL
• Press the MENU button.
Select "BACKGRND LVL" with the ADJUSTMENT ƒ/∂ but-
tons. Then press the ENTER button to change the picture as
indicated on the left.
• Select "RED" or "BLUE" with the ADJUSTMENT ƒ/∂ buttons.
Adjust the mode you want with the ADJUSTMENT ß/© but-
tons.
• To return to the factory preset mode, press the ADJUST-
MENT ƒ/∂ buttons to select "RESET" then press the ENTER
button.
• Press the MENU button to select the normal screen mode.
Note:
• To display only the item that you want to adjust, press the ENTER
button after selecting the item with the ADJUSTMENT ƒ/∂ buttons.
Then adjust the item with the ADJUSTMENT ß/© buttons.
E-26