Advertisement
Regular Maintenance 日常检查及保养
Monthly Maintenance 每月进行 1 次的保养
CLEANING OF BACK FILTER 清理内层过滤网
You can see the back filter after the lint filter is taken away.
Normally, you can clean the back filter without removing it.
除去外层过滤网后可见到背部的内层过滤网。可选择不需取出，在原位清洗。
Remove the lint by a soft brush and avoid scratching
为避免弄损表面，请以软擦除布屑灰尘。
In case you cannot clear the lint easily, remove the
back filter to clean.
( Unscrew two resinous screws by hand. In case
resinous screws are tight, please use (+) screwdriver.)
若污渍难以清除或脱落時，可把內层过滤网取出清洗。
(用手取去2顆螺丝，若螺丝难以取出，请使用十字螺丝
刀)
How to fix the Back Filter
The (+) portion of the back filter
puts together to the (+) portion of
the drum and please fix it by two
resinous screws.
装嵌内层过滤网的方法
內层过滤网的十字部分，要配对干
衣鼓上的十字部分，然后嵌好，用
2颗螺丝上紧。
Back Filter
内层过滤网
Resinous Screw
螺
丝
Match these por tions together
b e f o re f i x i n g b y t w o re s i n o u s
screws.
先装配这部分，才用2颗螺丝安装。
− −
Back Filter
内层过滤网
Drum inside
干衣鼓内部
Screw Hole
螺丝孔
Advertisement
