Output Modes; Sort Mode; Group Mode; Offset Function - Sharp MX-M453N Operation Manual

OUTPUT MODES

This section explains the output modes.

Sort mode

This is used to sort (collate) output into sets.
Example: Sorting the output into 5 sets
Originals
Set the number of copies (5).
Touch the [Output] key.
Output
Touch the [Sort] key.
Sort
Press the [START] key.
• The sort function is automatically selected when
originals are placed in the automatic document feeder.
• When the Quick File Folder for document filing is
full, copying of a large number of originals using the
sort function will be impeded. Delete unneeded files
from the Quick File Folder.

Offset function

This function offsets each set of copies from the previous set in the output tray, making it easy to separate sets of copies.
• The offset function cannot be used in the right tray.
• The offset function cannot be selected when the staple sort function is selected.
Output
Offset function "ON"
2-33

Group mode

This function groups copies by page.
Example: Groups of 5 copies of each page
Originals
Set the number of copies (5).
Touch the [Output] key.
Output
Touch the [Group] key.
Group
Press the [START] key.
The group function is automatically selected when an
original is placed on the document glass.
Offset function "OFF"
COPIER
Output
Contents