Sharp MX-M453N Operation Manual page 838

CHANGING THE PORT
7
Click the [Next] button in the screen of
step 5.
8
Click the [Finish] button.
When using a port created with "Standard TCP/IP Port"
When using a port created using "Standard TCP/IP Port" in Windows 2000/XP/Server 2003/Vista/Server 2008, in the
screen that appears after you click the [Configure Port] button in the screen of step 3, make sure the [SNMP Status
Enabled] checkbox is not selected (
to print correctly.
32
). If the [SNMP Status Enabled] checkbox is selected (
9
Click the [Close] button in the screen of
step 2.
), it may not be possible