Sharp AR-C360P Utility Manual page 164

Overlays
Windows PostScript
Printing
1. Open the file you want to print.
2. Click File
3. Right-click the appropriate printer.
4. Your action depends on your operating system.
Windows XP:
Windows 2000:
Win Me/98, NT:
5. Click the Job Options
6. Click Overlay...
7. To define an overlay, click
8. In the Overlay Name
The Overlay Name must be EXACTLY the same as the file
name you noted in the previous section. This is the name
under which the file is stored on the printer's hard disk
drive. It is case sensitive.
9. In ID Values, e
instructions for the Storage Device Manager utility.
10. Select the pages where the overlay prints. Use
Print on Pages
or
Custom Pages
document.
11. Click Add .
12. Click Close
13. Repeat steps 8 though 12 for each overlay you wish to add.
14. Under
Defined Overlay
Add button to add the overlay to the list in
15. Select Print Using Active Overlays
16. Click OK .
Print .
→
Click Preferences.
Click
Click Properties.
tab.
list, enter the file name of the overlay.
nter the ID of the file. Please refer to the
to select specific page numbers in the
.
, highlight the overlay name. Click the
Sharp AR-C360P Utilities Guide
Storage Device Manager • 164
Printing Preferences.
Define Overlays
NOTE
.
.
Active Overlays .