Sharp AR-C360P Utility Manual page 139

Forms
PostScript
Step 3a: Add Files to the Project
1. Click Projects
The Open dialog box appears.
2. Make sure PRN files (*.prn)
drop-down list.
3. Browse to the folder where the files are saved. Select the files
you wish to add to the project. Click
The Information dialog box appears.
4. Click OK .
The files are saved as HST.
5. Repeat steps 1 through 4 until you have added all the files you
wish to add to the Project.
Step 3b: Delete Files from the Project
To delete a file from the project, click the file name.
Click Projects
Add File to Project
→
NOTE
Remove File from Project.
→
Sharp AR-C360P Utilities Guide
Storage Device Manager • 139
.
is selected in the
Open .
Files of type