Chapter 5 Backup
If Backing Up from rsync-Compatible Devices to the TeraStation
If you want to set an rsync-compatible device as the backup source and back up data on the rsync-compatible
device to the TeraStation, you will need to enable rsync access on the TeraStation.
1
From Settings, click File Sharing.
2
Click the settings icon (
3
Enter this TeraStation's admin password into the "Password" field and click OK.
Note: If you want to encrypt the rsync access, enable rsync over SSH.
4
Move the rsync switch (
Restoring Backup Data
The procedure for restoring backup data varies depending on the backup mode. Refer to the following subsection
corresponding to the backup mode you have used for backup. When restoring backup data, make sure you have
enough available space on the TeraStation to accommodate the backup data, otherwise the restore process will fail.
Full and Management Backups
Copy and paste the backed up files from the backup destination folder to a folder which you want to restore.
) to the right of "rsync".
) to the
117
position to enable rsync and finish configurations.