Speakers; Removing The Speakers - Dell Vostro 5515 DVC9Y Service Manual

1. Slide the I/O board into the slots on the palm-rest and keyboard assembly.
2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
3. Replace the screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly.
4. Connect the power-button with optional fingerprint reader cable into the connector on the I/O board and close the latch to
secure the cable.
5. Connect the coin-cell battery cable to the I/O board.
6. Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
7. Adhere the tape that secures the I/O-board cable to the I/O board.
8. Close the left display hinge.
9. Replace the three (M2.5x4.5) screws that secure the left display hinge to the palm-rest and keyboard assembly.
1. Install the network-port
2. Install the base cover.
3. Follow the procedure in

Speakers

Removing the speakers

1. Follow the procedure in
2. Remove the base cover.
The following images indicate the location of the speakers and provide a visual representation of the removal procedure.
bracket.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 41