Advertisement
CARE & MAINTENANCE
CLEANING
1
Separate all parts.
2
Wash all containers in warm, soapy water with a soft cloth.
Hand-Washing
Wash cups, lids, and blade assembly in warm, soapy water. Use a dishwashing utensil with a handle
to avoid direct contact with the blades. Exercise care when handling the blade assembly as the
blades are sharp. Thoroughly rinse and air-dry all parts.
Dishwasher
Accessories are top-rack dishwasher safe and should NOT be cleaned with a heated dry cycle.
Ensure the blade assembly and lid are removed from the cup before placing in the dishwasher.
Power Pod
Unplug the power pod before cleaning. Wipe power pod with a clean, damp cloth.
NEVER directly spray the pod with water or other liquids.
DO NOT use abrasive cloths/pads/brushes to clean the pod, as this can dull or scratch the surface.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system that prevents damage to the motor and drive system should
you inadvertently overload it. If the unit is overloaded, the motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1
Unplug the power pod.
2
Allow the power pod to cool for approximately 15 minutes.
3
Remove the blade assembly. Empty the container and ensure no ingredients are jamming
the blade assembly.
IMPORTANT: Ensure that maximum capacities are not exceeded. This is the most typical cause of
appliance overload.
ORDERING REPLACEMENT PARTS
To order additional parts and accessories, visit AU ninjakitchen.com.au NZ ninjakitchen.co.nz
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
Advertisement
