Page 1
™ • Nutri Ninja Cups, BPA free ® • Shaker Lid for dispensing and storage • Cord storage Welcome to the Ninja AUTO-iQ Experience! The Nutri Ninja with AUTO-iQ features ® ™ ® ™ pre-programmed settings that take the guesswork out of drink and meal making. These programs are timed to deliver consistent, delicious results that finish on their own so all you have to do is...
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK FOLLOWED, INCLUDING THE FOLLOWING: OR INJURY: READ ALL INSTRUCTIONS BEFORE USING YOUR CAUTION: Blade assembly is sharp, NUTRI NINJA WITH AUTO-iQ ® ™ handle with care. When handling the blade assembly, always hold by the base of the POLARIZED PLUG blade assembly.
32 ounces (4 cups) 20. To reduce the risk of injury, NEVER operate the 24 ounces (3 cups) appliance without the blade assembly in place. 18 ounces (2.25 cups) 12 ounces (1.5 cups) 21. DO NOT try to defeat the interlock mechanism; NOTE: Select accessories are included. Other are available make sure that the attachment is properly for purchase at www.ninjakitchen.com. To see what is installed before operating the appliance. included with this model, please refer to the packaging. 22. DO NOT expose cups to extreme temperature E uro-Pro, Nutri-Ninja and Ninja are registered trademarks changes. of Euro-Pro Operating LLC. 23. DO NOT overfill. Sip & Seal, Pro Extractor Blades and Auto-iQ are trademarks of Euro-Pro Operating LLC. 24. DO NOT operate the appliance empty. www.ninjakitchen.com...
Cup ® ® ® NOTE: The quantity, sizes, and presence of some accessories depends on the specific model configuration. All configurations include a motor base, blade assembly, certain Nutri Ninja cups, Sip & Seal Lids, and instructions. ® ™ Before First Use...
Page 5
ASSEMBLY REMOVAL Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 NOTE: When using the AUTO-iQ presets, the unit will ™ CAUTION: DO NOT BLEND HOT LIQUIDS. operate using pulses, pauses and continuous runs. The IMPORTANT: Place the motor base on a clean, pauses allow the contents of the cup to settle. When dry, level surface such as a counter or table top. the timer reaches “0”, it will stop by itself.
CAUTION: DO NOT process hard, dry ingredients such as coffee beans, grains, seeds or spices without adding juices or other liquids. Softer items such as cheese, bread and nuts may be chopped without adding liquids by using the Pulse function. FILLING YOUR NUTRI NINJA ® For best results, always follow recipe directions when filling your Nutri Ninja cups. When you’re not using a...
CAUTION: DO NOT immerse the motor base into damaged and won’t cause a hazard. water or any other liquid. RESETTING THE MOTOR THERMOSTAT CAUTION: Handle the blade assemblies with care as the blades are very sharp. T he Nutri Ninja with AUTO-iQ features a unique ® ™ safety system which prevents damage to the unit’s 1 Separate/remove all parts from each other.
Troubleshooting Guide PROBLEMS POSSIBLE REASONS & SOLUTIONS • Make sure the unit is plugged in Unit doesn't turn on • Insert and rotate cup clockwise in the base until it "clicks". Display should turn on. • Remove cup from base by rotating cup counter clockwise and lifting out. Unit doesn't turn off Display should turn off. Unplug the power cord from the outlet. • Set the cup on a level surface. Place the lid or blade assembly on the top Lid/blade assembly hard to of the cup and align the threads so that the lid/blades sit flat on the cup. assemble Twist clockwise so that the lid/blades evenly align to the cup until you have a tight seal. • For best results when chopping, make sure all ingredients are as dry as possible. Cut pieces down to even sizes, and reduce the amount of Food is not evenly chopped food in the cup. Use very short pulses by quickly pressing the "PULSE"...
We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. PRODUCT REGISTRATION Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja product within ten (10) days of ® purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.