Ninja NC600CCO Quick Assembly
Ninja NC600CCO Quick Assembly

Ninja NC600CCO Quick Assembly

Professional blender
Hide thumbs Also See for NC600CCO:

Advertisement

Available languages

Available languages

Please make sure to read the enclosed Ninja

PITCHER

1. Place pitcher on base
and turn clockwise to
lock in place.

TIP FOR PITCHER

WARNING: Stacked blade assembly is sharp and not locked in place. Make sure lid is locked onto pitcher
before pouring. If pouring without lid, carefully remove stacked blade assembly first. Failure to do
so will result in a risk of laceration. Refer to the Ninja Owner's Guide for additional information.

CLEANING INSTRUCTIONS

Dishwasher: The pitcher, lid, and
stacked blade assembly are all
dishwasher safe. The lid and stacked
blade assembly are top-rack dishwasher
safe. Ensure the stacked blade assembly
is removed from the pitcher before
placing in the dishwasher.
WARNING: Handle the stacked blade assembly with care when washing, as the blades
are sharp. Contact with the blades' edges can result in laceration.
QUESTIONS? We're here to help. Call 1-877-646-5288 or visit ninjakitchen.com

PROFESSIONAL BLENDER

QUICK ASSEMBLY
2. Holding the stacked blade
assembly by the top of the
shaft, insert it into the pitcher.
Hand-washing: Wash the pitcher, lid, and
stacked blade assembly in warm, soapy water.
When washing the stacked blade assembly, use
a dishwashing utensil with a handle to avoid direct
hand contact with blades. Handle the stacked
blade assembly with care to avoid contact with
sharp edges. Rinse and air-dry thoroughly.
Owner's Guide prior to using your unit.
®
Start by pulsing 3 or 4 times to break
down tough ingredients. Then blend
to desired consistency.
Best for: Large batches of milkshakes
and frozen drinks.
NC600CCO
3. Align arrows on lid and
handle, then lower handle
to lock in place.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NC600CCO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ninja NC600CCO

  • Page 1: Professional Blender

    WARNING: Stacked blade assembly is sharp and not locked in place. Make sure lid is locked onto pitcher before pouring. If pouring without lid, carefully remove stacked blade assembly first. Failure to do so will result in a risk of laceration. Refer to the Ninja Owner’s Guide for additional information. CLEANING INSTRUCTIONS...
  • Page 2 NC600CCO Veuillez lire le manuel du propriétaire Ninja ci-joint avant d’utiliser votre appareil. MÉLANGEUR PROFESSIONEL ASSEMBLAGE RAPIDE PICHET 1. Placez le mélangeur sur 2. Insérez l’ensemble de lames 3. Alignez les flèches sur le la base et en le tournant superposées dans le pichet...

Table of Contents