Training Mode - Sharp XE-A403 Instruction Manual

2 Programming report 2
3 Auto key programming report

TRAINING MODE

The training mode is used when the operator or the manager practices register operations.
When a clerk in training is selected, the machine automatically enters the training mode. To specify a clerk to be
trained, refer to "Training clerk specification for training mode" in "ADVANCED PROGRAMMING" in page 54.
The training operation is valid only in REG, MGR and VOID mode.
The corresponding clerk memory is only updated in the training mode.
Key operation example
A clerk set in training
56
Job code
A to H from the left
* Job code #63, 64, 65, 67,
68, 69, 71, 72, 76, 77, 85,
87 and 95 are fixed
settings, for which you
cannot change the
settings.
Training clerk specification
Language selection
L
40
∞
1000
@
3
£
A
4 Printer density programming report
5 PLU programming report
PLU code
PLU text
Receipt print
Entered value
Printer density
Printing density
example
Range
Commission
group
Mode parameter
Unit price
Associated
dept. code