Commission Rate Programming; Miscellaneous Key Programming - Sharp XE-A403 Instruction Manual

*: Item:
A Commission group number
B PLU/subdepartment selection
Key operation example
When you program the last PLU code, the programming sequence will be complete with a press of
s
the

Commission Rate Programming

3
Based on each clerk's sales total of each commission group and the corresponding commission rate, the
commission amounts are calculated, which is printed on clerk reports.
Commission rate
s 28
Key operation example
You must use a decimal point when setting a fractional rate.

Miscellaneous Key Programming

4
The cash register provides miscellaneous keys such as
A
. While the cash register is pre-programmed so you can use these keys, you must set a currency
conversion rate to use
data below for programming these keys. Factory setting is indicated with parentheses.
% &
,
-
f
r R
,
V
p
1
s A
10
key.
@
Commission
number (1 or 2)
s @
28
@
1
s A
15
V
key. You can also program these keys for more convenient use. Please refer to the
Percent rate (0.00%), tax status (non-taxable), sign (minus), item % and subtotal %
entry* (both are allowed), percent rate limitation (100%)
Amount (0.00), tax status (non-taxable), sign (minus), item
(both are allowed), entry digit limit (7 digits)
Not necessary to program
Entry digit limit (9 digits)
Currency conversion rate (0.0000), currency conversion rate entry method - open or
preset (both are enabled)
Selection:
Subdepartment
PLU
@
Commission rate
(0.00 - 999.99)
% & - f
, , ,
Entry:
0-2 (0: Non commission)
0
1
Print
Commission group
PLU/subdept.
s A
Print
r R V t C
, , , , ,
_
and subtotal
X Y
, , and
_
entry*
35