Radio; Alarm And Sleep Operation - Sharp DK-A10P Operation Manual

Snooze function
Once timer has started, pressing the SNOOZE/DIMMER button will
stop alarm for 5 minutes.
Once the snooze time has expired, alarm will continue.
To turn off the alarm function
During alarm or snooze, press the ALARM ON/OFF button to turn it
off.
Sleep operation
The radio, compact disc and iPod can be turned off automatically.
1
Playback the desired sound source.
2
Press the SLEEP button to select sleep time.
3
Press the MEMORY button.
"SLEEP" will appear.
4
The unit will enter the clock function automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the SLEEP button on the
remote control once to select "SLEEP XXX".
"XXX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by
pressing the SLEEP button (steps 2 - 3).
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the SLEEP button to select
"SLEEP OFF", and press the MEMORY button.
To use alarm and sleep operation together
Sleep and alarm:
For example, you can fall asleep listening to the radio and wake up
to iPod in the next morning.
1 Set the sleep time (see left, steps 1 - 4).
2 While the sleep timer is set, set the alarm
(steps 1 - 6, page 26).
3 Activate the alarm (see page 26).
Sleep timer setting Alarm setting
10 minutes - 2 hours
Sleep operation will
automatically stop
End time
30 minutes
Alarm start time
DK-A10P
DK-A10P (BK)
27