Sharp DK-A10P Operation Manual page 23

Procedure to playback MP3/WMA disc
To play back CD-R/RW.
1
Press the CD button, and insert an MP3/WMA disc.
After disc is inserted and TOC reading, disc info will be
displayed.
MP3 indicator
WMA indicator
In case folder is selected, proceed to step 2.
In case file is selected, proceed to step 4.
2
Press the FOLDER button, and press the TUNING
( or ) button to select desired playback folder. (Folder
mode on)
FOLDER indicator
FOLDER name
To start playback with folder mode on, go to step 5.
To change the playback folder, press the TUNING (
select another folder.
3
Select desired file to be played back by pressing the
or button. Proceed to step 5.
FILE name
CD indicator
TOTAL indicator
or ) to
4
Select desired file to be played back by pressing the
or button. (Folder mode off)
FILE name
5
Press the / button.
Playback will start and file name will be displayed.
Title, Artist & Album name are displayed if they are recorded on
the disc.
Display content can be changed by pressing the DISPLAY
button.
Timer Counter
Artist Name
In case of playback with the folder mode on, press the TUNING (
or ) button, and the folder can be selected even though it is in
playback/pause mode.
It will continue playback/pause mode in the 1st track of the
selected folder.
Note:
If "NOSUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
DK-A10P
DK-A10P (BK)
Clock Display
File Name
Album Name
23