Table of Contents
Advertisement
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
PROBLEM
The wet/dry vacuum will not
operate.
The dust comes out from
the motor cover.
Reduced efficiency and
motor/speed vibration.
TROUBLESHOOTING
POSSIBLE CAUSE
No power supply.
Faulty power cord.
Collection tank is full.
Switch in the wrong position.
The cartridge filter is missing or
damaged.
Vacuum has been used to collect
fine dust, such as dry wall dust,
fireplace soot, or ash, without a fine
dust filter.
There are blockages in the nozzle,
hose, or the collection tank inlets.
The cartridge filter is clogged by
dry dust.
Check the power supply, cord,
breakers, and fuses.
Unplug and check the power
cord. If damaged, have it
repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the
power head.
Attach or replace the cartridge
filter.
Remove the standard cartridge
filter and buy the appropriate
fine dust filter.
Unplug and check nozzle, hose
and collection tank inlets for
blockages.
Take off the filter and clean it or
install a new cartridge filter.
16
SOLUTION
Advertisement
Table of Contents
