Toshiba RDXV60KB Owner's Manual page 22

E3TK6BD_EN.book Page 22 Wednesday, February 17, 2010 10:18 AM
Skip a Preset Channel
ANALOG
You can set the unit to skip channels. You can no longer
receive or watch when you access channels using
[PROG. ].
1
Follow steps 1 to 4 in "Manual Tuning
(ANALOG)" on page 21.
2
Select "Position" using [K L], then press [1].
3
Select the position number using
[the Number buttons] or [K L], then press [0].
4
Select "Skip" using [K L], then press [1].
5
Select "ON" using [K L], then press [0].
• To skip another channel, repeat steps
6
Press [SETUP] to exit.
Move
ANALOG
You can replace two channels.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Channel" using [K L], then press
[ENTER OK].
3
Select "ANALOG Channel Setup" using [K L],
then press [ENTER OK].
4
Select "Move" using [K L], then press
[ENTER OK].
5
Select the position number to change the
channel using [K L], then press [ENTER OK].
You cannot select a position number where "– – –"
appears next to the number, because "Skip" is set to "ON"
for that position number.
6
Move the channel to another position number
using [K L], then press [ENTER OK].
• To move another channel, repeat steps
7
Press [SETUP] to exit.
Auto Tuning (DVB)
DVB
You can programme the tuner to scan only the DVB channels
that you can receive in your area.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Channel" using [K L], then press
[ENTER OK].
3
Select "DVB Channel Setup" using [K L], then
press [ENTER OK].
4
Select "Auto Tuning" using [K L], then press
[ENTER OK].
The unit will start storing channels available in your area.
22
EN
The tuner scans and memorises all the active DVB
channels (TV / Radio) in your area.
S.No. TV Channel
Channel 69 UHF
5
Press [ENTER OK] to exit.
• After auto tuning is completed, the lowest memorised
DVB channels appears on the screen.
2 5
to .
• You can use [PROG.
channels.
Note
• If you press [RETURN BACK] or [SETUP] during the
scanning, auto tuning will be cancelled.
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and individually.
1
Follow steps 1 to 3 in "Auto Tuning (DVB)" on
this page.
2
Select "Manual Tuning" using [K L], then
press [ENTER OK].
3
Select your desired position number using
[K L], then press [ENTER OK].
Channel
• The tuner will begin to search up or down automatically.
When a DVB channel is found, the unit will stop
searching.
• When "Auto" is selected, the unit will search for the
channels which have not been stored in channels
5 6
memory.
to .
4
Press [SETUP] to activate the setting.
Service Update
DVB
This unit has "Service Update" function which searches and
stores newly available digital channels automatically at 8:00. If
a new channel is found, a message will appear on the screen
when you turn on the DVB channel at first time after storing a
new channel. Press any button to clear the message.
Channel Search
S.No. Radio Channel
14 E4 102 Teletext Cars
13 More4 729 RadioMusicShop
32 Film4+1 728 Heart
28 ITV4
75 CITV
34 SETANTA SPORT
858000KHz/8M
Progress 100%
Exit
OK RETURN Back
] to change the DVB
Auto