Installing The Appliance; Preparing The Appliance For The First Time; Appliance; Control Panel - Bosch KGN3 Series Information For Use

en Familiarising yourself with your appliance
Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150 mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
Install the appliance in accordance
▶
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 45
4.5 Connecting the appliance
to the electricity supply
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → Fig.
Check the mains plug is inserted
2.
properly.
a The appliance is now ready for
use.
38
/
1 4
5 Familiarising yourself
with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Refrigerator compartment
A
→ Page 42
Freezer compartment
B
→ Page 42
Control panel → Page 38
1
Lighting
2
Temperature controller (refri-
3
gerator compartment)
Rating plate → Page 51
4
Fruit and vegetable container
5
→ Page 39
Freezer tray → Page 39
6
Frozen food container
7
→ Page 45
Screw foot
8
Butter and cheese compart-
9
ment → Page 39
Door storage compartment
10
for large bottles → Page 39
Note: Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
5.2 Control panel
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
→ Fig.
2