Related Manuals for American Standard 61000NS-WT
Summary of Contents for American Standard 61000NS-WT
- Page 2 Replace dampers for the S&C S&C disassembling 1) Use screwdriver, knife or any similar sharp tool to take out the buckle. 2) Use screwdriver, knife or any similar sharp tool to push soft-close set towards the right side, until expose the small hole on the press button, stick the hole and then push it towards right side until can not move further.
- Page 3 Replace dampers for the S&C S&C assembling Small hole of Wide side rib soft-close set 1) Put left and right soft-close set into the seat, make sure the small hole of the soft-close set and the wide side rib is upward. 2) Assemble right soft-close set, set small hole and wide side rib upward and then push it into the cover.