11. DESCALING
IMPORTANT!
Beore use, read the instructions
and the labelling on the descaler
pack.
You should use descaler author-
ised by the manuacturer only
(cod. 9029798718 M3BICD200)
WebShop AEG:
www.aeg.com/shop.
Using unsuitable descaler and/or
perorming descaling incorrectly
may result in aults not covered by
the manuacturer's warranty.
Descale the appliance when PLEASE
DESCALE YOUR MACHINE appears
on the display. To descale immediately,
press DESCALE, and ollow the instruc-
tions rom point 4;
To access the descaling menu:
1. Turn the rotary (C2) to select "Menu",
then press the dial to conirm.
2. Select "Cleaning" and conirm.
3. Set "Descaling" and conirm.
4. Select "Start" to start the descaling
cycle then ollow the instructions on
the display;
5. REMOVE SOFTENER FILTER (i
activated); extract the water tank
(A6), remove the sotener ilter (B4)
(i included), empty the water tank.
Press NEXT;
6. ADD DESCALER (UP TO LEVEL
A) AND WATER (UP TO LEVEL B);
Pour the descaler into the tank up to
the level A marked inside the tank
(equal to one 100 ml pack), then add
water (one litre) up to level B and put
the water tank back.
7. Press YES;
8. PLACE 2.5l CONTAINER UNDER
SPOUTS PRESS OK TO START
DESCALING:
Place an empty container with a
minimum capacity o 2.5 litres under
the hot water/steam spout (B6) and
coee spouts (A7);
DANGER OF BURNS!
Hot water containing acid lows
out o the hot water/steam spout.
Take care to avoid contact with
splashes o this solution.
9. Press OK to conirm that you have
added the descaling solution. DES-
CALING UNDERWAY, appears on
the display. The descale programme
starts and the descaler liquid comes
out o the hot water/steam and coee
spouts. A series o rinses and pauses
is perormed automatically to remove
all the scale residues inside the co-
ee machine;
Ater about 25 minutes, descaling stops:
10. RINSE AND FILL WATER TANK UP
TO MAX LEVEL: the appliance is
now ready to rinse with resh water.
Empty the container used to collect
the descaler solution. Extract the
water tank, empty, rinse under run-
ning water, ill with resh water up to
the MAX level and put back in the
appliance;
11. PLACE 2.5l CONTAINER UNDER
SPOUTS. PRESS OK TO START
RINSING: Place the container used
to collect the descaler solution empty
under the coee spouts and hot wa-
ter/steam spout (ig. 8 Quick Guide)
and press OK;
12. Hot water is delivered irst rom the
coee spouts, then rom the hot
water/steam spout and RINSING,
please wait is displayed;
13. When the water in the tank has run
out, empty the container used to col-
lect the rinsing water;
14. (I the ilter is installed) INSERT THE
FILTER IN ITS HOUSING Press
NEXT and extract the water tank.
Replace the water sotener ilter i
removed previously;
15. FILL WATER TANK UP TO MAX
LEVEL: Fill the tank up to the MAX
level with resh water;
16. INSERT WATER TANK: Put the
water tank back in the appliance;
17. PLACE 2.5l CONTAINER UNDER
SPOUTS. PRESS OK TO START
RINSING:
Place the container used to collect
ENGLISH
19