pick.
10.8 Cleaning the pre-ground
coffee funnel
Check regularly (about once a month )
that the pre-ground coee unnel (A11) is
not blocked. I necessary, remove coee
deposits with the brush (B5) supplied.
10.9 Cleaning the brewing unit
The brewing unit must be cleaned at
least once a month.
IMPORTANT!
The brewing unit (A2) must not be
removed when the appliance is
on. Do not use orce to remove the
brewing unit.
1. Make sure the machine is correctly
turned o.
2. Open the service door.
3. Remove the drip tray and waste co-
ee container (ig. 26 Quick Guide).
4. Press the two coloured release but-
tons inwards and at the same time
pull the brewing unit outwards (ig. 31
Quick Guide).
IMPORTANT!
Do not use washing up liquid to
clean the brewing unit. It would
remove the lubricant applied to the
inside o the piston.
5. Soak the brewing unit in water or
about 5 minutes, then rinse (ig. 32
Quick Guide).
6. Ater cleaning, replace the brewing
unit (A2) by sliding it onto the internal
support and pin at the bottom, then
push the PUSH symbol ully in until it
clicks into place.
I you encounter diiculty inserting
the brewing unit, beore inserting
it you must adapt it to the right
dimension by pressing it orceully
rom the bottom and top.
7. Once inserted, make sure the two
coloured release buttons have
snapped out.
8. Replace the drip tray and waste co-
ee container.
9. Close the service door.
10.10 Cleaning the milk con-
tainer (B8)
Each time the coee machine
perorms a milk based recipe, it
ENGLISH
17