Page 1
Ø150x455 mm INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
Page 2
INSTRUCTIONS FOR THE LIGHT 1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. 3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Page 3
DIAGRAM FOR REPLACING THE LIGHT SOURCE [BY PROFESSIONALS ONLY] Replaceable (LED only) light source by a professional DIAGRAM FOR REPLACING CONTROL GEAR [BY PROFESSIONALS ONLY] Replaceable Control Gear by a professional Remove the rubber pad from the lamp Remove drive cover Fasten the drive cover with screws, Disassemble the blue and brown wire of the old place the drive into the luminaire base,...
Need help?
Do you have a question about the VT-7506 and is the answer not in the manual?
Questions and answers