MULTIQUIP GLOBUG Series Operation And Parts Manual page 24

For a prolonged life cycle an extended quality follow the
recommended GloBug lighting system service guidelines
as referenced in Figure 30 and Table 4.
Figure
L1 Lamp (Base)
L2 Connector
Lamp L3 Lamp Holder
L4 Pipe Frame
L5 Lamp
B1 Balloon (Envelope)
B2 Zipper
Balloon
B3 Fan Motor (Blower)
B4 T-Handle bolt (Balloon) Broken?
E1 Power Cable
Electric E2 Plug
E3 Lamp Switch
P1 Clamp
P2 Support pipe
P3 Support bolt
Pole
P4 Straight pole
P5 Offset pole
P6 Offselt bolt
❖ - Daily Check ■ - Every 20 Hours
GB114BS/BP GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #3 (01/06/09) — PAGE 25
Table 4. Periodic Check and Maintenance
Part
Lamp base loose?
Cable disconnected or loose?
Lamp holder loose?
Frame pipe skewed?
Defective lamp?
Defective or dirty?
Broken?
Not working properly?
Defective or worn cable?
Damaged?
Damaged or not working properly?
Broken?
Support pipe bent or damaged?
Support bolt loose?
Straight pole bent or damaged?
Offset pole bent or damaged?
Offset bolt loose?
Check Item
MAINTENANCE
Solution Frequency
Screw in securely
Connect securely
Replace
Replace
Replace
Replace
Replace
Repair or replace
Replace
Replace
Replace
Replace
Repalce
Replace
Tighten securely
Repalce
Replace
Tighten securely
❖
❖
❖
❖
■
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖