MULTIQUIP GLOBUG Series Operation And Parts Manual page 16

REMOVING THE PROTECTIVE COVERING
1. Expose the balloon by pulling down on the velcro tab
and unzip the protective cover as shown in Figure 7.
STEP 1
UNZIP
PROTECTIVE
COVER
BALOON
STEP 2
FOLD PROTECTIVE
COVER INTO ITSELF
BALLOON
FULLY
EXPOSED
Figure 7. Folding Protective Cover
GB114BS/BP GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #3 (01/06/09) — PAGE 17
PROTECTIVE
COVER
VELCRO
TAB
CONNECTING POWER CABLE
1. Connect 16.4 ft. (5 meters) lamp power cable (Figure 8)
to the balloon power cable.
BALLOON
POWER
CABLE
LAMP
POWER
CABLE
Figure 8. Connecting Lamp Power Cable
2. Attach both S-type hooks (Figure 9) on the lamp power
cable into the cable support holes on the offset pole.
LAMP
POWER
CABLE
S-TYPE
HOOK
Figure 9. Attachment of S-Hooks
SETUP
LAMP
ASSEMBLY
BALLAST
OFFSET
POLE