Folding Rear Seats - BYD SEAL 2023 Owner's Manual

Memory wake-up function
Memory wake-up function in OK mode
With the gearshift lever in the "P"
●
position, the driver's seat memory
system will perform memory wake-up
operation when the memory system
switch is pressed if the following
conditions are met:
The vehicle is not in anti-theft mode.
●
No speed.
●
Memory switch signals are valid.
●
No actions are performed by the
●
seats and side mirrors.
Heating and Ventilation Systems*
To enable or disable the heating
●
& ventilation function, go to
Infotainment touchscreen
→ Seat Operation.
Tap "Drop-down" on the home page
●
of the infotainment system to operate
the seat heating and ventilation setting
buttons.
Heating system adjustment
Seat heating: Control the operation
●
mode of the heating pad by using
the seat heating switch. The heating
function has two modes.
After each power-on, the driver's
●
seat remembers the last mode,
and the initial heating state of the
passenger's seat is Off.
Press the switch to select the
●
operation mode of the seat heater in
the 1st gear or 2nd gear.
Press the OFF gear to deactivate the
●
heating function.
Ventilation system adjustment
60
Seats Ventilation: Control the
●
operation mode of the ventilation fan
by using the seat ventilation switch.
Seat ventilation has two modes.
●
●
●
Ventilation and heating functions
cannot be turned on at the same time.
Press the ventilation switch to make
●
the ventilator work; if the heating
switch is then pressed, the ventilator
will stop and the heater will start to
→ A/C
work.
Press the heating switch to make the
●
heater work; if the ventilation switch is
then pressed, the heater will stop and
the ventilator will start to work.

Folding Rear Seats

Pull up the folding release clasp on the
seat back to fold the rear seat back.
After each power-on, the driver's
seat remembers the last mode, and
the initial ventilation state of the
passenger's seat is Off.
Press the switch to select the
operation mode of the seat
ventilation in the 1st gear or 2nd
gear.
Press the OFF gear to deactivate the
ventilation function.