Folding In Rear Seats; Head Supports - BYD ATTO 3 2022 Owner's Manual

Folding in Rear Seats

• Flipping and lowering the backrest
• Pull up the backrest drawstring.
• Push the backrest forward or
backward to flip it over. Flip forward
until the backrest is in contact with
the seat cushion, and flip it back to the
backrest locking position (a locking
sound is heard).

Head Supports

Head Support Adjustment
1. Lifting the head support: press the head
support adjustment button, lift the head
support to a proper position, and release
this button after hearing a locking sound.
2. Lowering the head support: press the
head support adjustment button, lower
the head support to a proper position,
and release this button after hearing a
locking sound.
3. Removing the head support: press
the head support adjustment button,
remove the head support, and release
this button.
4. Installing the head support: insert the
head support poles into the bushing
with the grooves facing forward. Press
the head support adjustment button,
press the head support down to a proper
position, and release this button.
REMINDER
•The head supports protect vehicle
occupants from neck and other
head injuries. The head support is
to be adjusted so that the back of
the passenger's head is in the center
of the head support. This way the
head support can provide maximum
protection. Adjust the head support
to the suitable position according to
the occupant's actual height.
•When adjusting head support height,
align the occupant's ear tip line with
the center line of the headrest.
•After adjusting the head support,
ensure that it is locked into position.
•Do not drive the vehicle without head
supports.
•Do not tie anything to the head
support stems.
04
61