Discharging Device - BYD SEAL 2023 Owner's Manual

REMINDER
is noticed when the vehicle is
powered on.

Discharging Device

This vehicle features a vehicle to load
●
(VTOL) function.
WARNING
Do not touch any metal terminal
●
of the discharging socket or
vehicle charge port during
discharging.
Stop discharging immediately if
●
there are any abnormalities such
as peculiar smell and smoke.
See "Charging Instructions" for
●
charging safety warnings.
Store the product in a cool and
●
dry place when it is not in use.
When discharging, do not place
●
the device in the trunk, under the
front of the vehicle, or near the
tires.
When using the device, prevent
●
it from getting rolled over by the
vehicle, dropped, or trampled on.
Never drop the device or move it
●
by pulling it directly by the cable.
Take caution when moving the
device.
Never use the charging device if
●
the power strip cable becomes
soft, the charging connector cable
is worn out, the insulation layer
is cracked, or any other damage
occurs.
Never use the device when the
●
discharging connector or power
WARNING
strip is disconnected or broken, or
when there is any sign of surface
damage.
CAUTION
Avoiding damage to
●
the discharging equipment
(precautions for discharging
equipment):
Prevent the discharging
●
equipment from suffering any
mechanical impact such as
dropping or hitting.
Do not place the discharging
●
equipment near heaters or other
heat sources.
Before discharging, please
●
confirm the vehicle SOC and
estimate the remaining driving
range.
Before VTOL discharging, ensure
●
that the load is turned off.
REMINDER
Try to use this function when the
●
SOC is high.
The VTOL function is restricted
●
when the vehicle SOC is low.
The static power consumption
●
of the vehicle will increase if,
when the vehicle is powered
off, the VTOL connection
device is connected for an
extended period without any
output. Therefore, removing the
discharging/charging connector
when the device is not used is
recommended.
04
87