BYD SEAL 2023 Owner's Manual page 192

CAUTION
Do not tow the vehicle from the
●
rear with four wheels staying on
the ground, to avoid damage to
the vehicle.
If a Tire Goes Flat
Maintain the lane position and
●
gradually slow down the vehicle. Drive
the vehicle off the busy road to a safe
place. Park on solid, flat ground and
avoid highway forks. Park on solid, flat
ground.
Please refer to the followings to
●
operate when parking:
1. Depress the brake pedal to stop the
vehicle smoothly, and then press the
P button to switch to P mode. In
such case, the P gear indicator on the
instrument cluster goes on.
2. Press START/STOP button.
Power off the vehicle and turn on the
●
hazard warning light.
Be sure to have all passengers get off
●
the vehicle and ask them to go to a
safe place away from crowded traffic.
To prevent slipping, secure the vehicle
●
by wedging the tire diagonally against
the flat tire.
CAUTION
Do not continue driving with a flat
●
tire. Driving even a short distance
can cause too severe damage for
the tire to be repaired.
In-Vehicle Tools
These tools are stored in a tool box
●
under the trunk cover flap.
① Warning triangle
② Reflective vest
③ Lug nut cover removal clamp
④ Using tire repair device
⑤ Tow hook
In an emergency where you need to
●
service the vehicle yourself, you must
know how to use these in-vehicle tools
and their locations.
Placing the Warning Triangle
REMINDER
Before repairing the vehicle
●
while stopped on a public road,
remember to place a warning
triangle in the lane where your
vehicle is located, 100-200 m
behind the vehicle, red side facing
vehicles oncoming from behind,
in order to warn them and prevent
accidents. After the repair, recover
the warning triangle for future
use.
The warning triangle is used to warn
drivers of vehicles coming from behind
and to avoid risk of collision with the
vehicle ahead being parked or repaired
due to high speed or late braking.
How to use the warning triangle:
1. Take the warning triangle out of its
box.
07
191