Kogan 9 Series Quick Start Manual page 6

USING THE MAGIC REMOTE
1. If you shake the Magic Remote le and right or turn its wheel while pointing it at
the TV, a pointer will appear on the TV screen. If you move the remote control to
the direction you want, the pointer follows the movement.
2. Move the pointer to the location you want and press the Wheel (OK) button to
execute the function.
3. If the pointer has not been used for a certain period of time, it will disappear.
When the pointer disappears from the screen, shake the Magic Remote right and
le . It will then re-appear. The pointer will disappear if you press the Up, Down,
Le or Right buttons then the remote will work as a conventional remote.
a). If the pointer is not responding smoothly, you can reset the pointer by moving it
to the edge of the screen.
a). Use the remote control within the specified range (within 10 metres). The
device may not function properly when outside the working distance or when an
obstacle blocks the line of sight.
a). Depending on the peripherals (wireless router, microwave oven, etc.), commu-
nicationl failures may occur.
a). Impacts can cause the Magic Remote to malfunction.
a). Take care not to bump into nearby furniture, electronic equipment or other
people when using the Magic Remote.
Bluetooth Remote Control Connection Method
Press and hold the Home Button and Back button simultaneously until the red
Power button on the remote control flashes 3 times. When the red light flashes,
release the buttons and wait for the TV to pair with the remote. Press the scroll
wheel (OK) button and a cursor will appear. Please note: If disconnected, recon-
nect as above.