Beko CWB 6666 X User Manual page 12

3 Operating your appliance
Key E = The Timer times the functions on activa-
tion for 15 minutes, after which they are switched
off. The Timer is deactivated by re-pressing Key
E. When the Timer is activated the decimal point
must flash on the display. The Timer cannot be ac-
tivated if the intensive speed is functioning.
The "clean air" function is activated by press-
ing key E for 2 seconds when the appliance is
switched off.
This switches the motor on for 10 minutes every
hour at the first speed.
During functioning a rotary movement of the pe-
ripheral segments must be visualised on the dis-
play. When this time has passed the motor switch-
es off and the fixed letter "C" must be visualised
on the display until the motor re-starts after 50
minutes for another 10 minutes and so on. Press
any key apart from the light keys to return to nor-
mal functioning. Press key E to deactivate the
function.
Active carbon/grease filter satura-
tion:
When display item C flashes, at a speed where
•
it alternates with the letter F (e.g. 1 and F), the
grease filters must be washed.
When display item C flashes, at a speed where
•
it alternates with the letter A (e.g. 1 and A), the
active carbon filters must be replaced or washed
depending on the type of filter.
After the clean filter has been positioned correctly,
the electronic memory must be reset by pressing
button A for approximately 5 seconds, until the
indication F or A shown on the display C stops
flashing.
12 / 30 EN
Mechanical controls (Fig.12): the
symbols are as follows:
A = LIGHT / ON-OFF key
B = OFF /FIRST SPEED key
C = SECOND SPEED key
D = THIRD SPEED key
If the hood is shut off at first, second or third
speed, when it is turned back on, it will start at the
same speed it was in when switched off.
THE MANUFACTURER DECLINES ALL RE-
SPONSIBILITY FOR EVENTUAL DAMAGES
CAUSED BY BREACHING THE ABOVE WARN-
INGS.
Cooker Hood / User Manual