SoundCraft Si Performer 1 User Manual page 46

CHANNELS & BUSSES > MIX OUTPUTS > SETUP
LCR Pan Width
Set the proportion of centre channel signal sent to Left And RIght.
Adjust the pan law when in LCR mode is active to increase/decrease the contributions to the LR and Mono buses
when panning.
Set Mix Sends Pre/Post
Set all contributions to the Mix Bus Pre- or Post-Fade.
This setting can override settings made in the Input Channel Setup.
Pre Fader Source
Select which Pre-Fader tap/source is used to supply this Mix Bus.
Only relevant when a Pre-Fade routing is selected in the Input or Output Bus Setup menus. The choices (since
console software version 1.6 either Pre Dynamics or Post EQ (but still pre-mute).
Output Patching
Choose specific analogue or digital outputs for this DSP Channel.
Touching the value fields will bring up the standard Patching setup on the Touch Screen. Two outputs can be
allocated, with individually patchable left and right connections. For more detail, please see section 5 - Inputs &
Outputs.
User Manual
6.2.1: CHANNELS & BUSSES > MIX OUTPUTS > OUTPUTS SETUP
6.2.1: MIX OUTPUTS SETUP