SoundCraft Si Performer 1 User Manual page 27

User Manual 4.1: MAIN MENU
TOUCH SCREEN > MAIN MENU
OSC
Settings and operations for the built in Oscillator.
Routing, waveform, frequency, and output options. See section 13 for more detail.
MONITOR
Settings for the monitoring systems.
Delay, patching, and Mono Check. See section 8.5 for more information.
INPUTS & VCA
Input channel or VCA Master-specific settings.
The Menu will change depending on whether an Input channel or a VCA Master is selected. For INPUTS, the menu
will show Naming, patching, Channel Isolate, Mix contribution routing, and so on. See section 6.1.1 for more
information. For VCA, the Menu will show VCA Name. See section 8.7 for more information.
OUTPUTS & DMX
Output channel or DMX-specific settings.
The menu will change depending on whether an Output channel (Mix Bus Master, Matrix Master, LR or M/C Main)
or a DMX controller is selected. For OUTPUTS the menu will show Naming, patching, bus routing, and so on. See
section 6.2.1 for more detail.
For DMX, the menu will show DMX Master Name.
EQ
Graphic representation of the EQ for the selected channel.
Simply touch the EQ Touch Screen button to see the frequency response graphic - incorporates the HPF and
4-band EQ, but not the Graphic EQ. See section 7.2.4 more more on the ACS EQ section.
4.1: TOUCH SCREEN > MAIN MENU