LG T1666TEFT1 Service Manual page 45

7) W a t e r d o e s n o t d r a in .
Where, what & how to check?
4. Check whether the drain hose is
blocked by foreign objects. It may
happen in case of the hose is a little
kinked.
PV Case
(for Non-Pump Model only)
1. Check whether the PV asm is
blocked by foreign objects.
Drain Motor
(For Non-Pump Model only)
1. Check resistance of the drain
motor if it can not pull the PV link.
Result of Check Possible Cause How to repair & settle
Blocked.
Blocked.
Resistance is
normal.
45
Blocked hose.
Remove the objects and
reinstall so that it can't
be kinked.
Separate the drain motor
from the PV link,
disassemble PV cover
and then remove the
foreign objects within
PV case.
Check the washer works
normally after repair
and reassembling them.
(PV link & drain motor
Drain motor coil is
Change the drain motor
open.
works normally after
reassembling.
(PV link & drain motor
lever should be
assembled accurately.)
Change the controller if
Contact defect in
there is no defects in the
connection parts
connection parts.
or defect of the
controller.
lever should be
assembled accuratel.)
Check the washer