Settings for compartment
The UltraPhase 1 values are pre-set in
the standard default settings.
Agent for
Confirm with the OK sensor button.
Miele UltraPhase 1
Confirm with the OK sensor button.
The following will appear in the display:
Set the dosage. Observe water hardness
levels
Confirm with the OK sensor button.
The dispensing quantity for
UltraPhase 1 for (hardness level I)
is pre-set.
Per load
Confirm the pre-set value with the
OK sensor button. If you want to
change this value, use the
sensor buttons and confirm with
the OK sensor button.
UltraPhase 1
Hardness level I
Hardness level II
Hardness level III
The following will appear in the display:
Insert
Before using for the first time
OK
OK
46
ml
OK
46 ml
58 ml
70 ml
Remove the cover cap from the
UltraPhase 1 detergent cartridge
included with the delivery.
Open the TwinDos flap.
19