Table of Contents
Advertisement
If the program finds an unflagged bad track, the report is
followed by a table like this:
Confirm to ragiotrr tha traak8 in the Write, Rmad Error
Track Table am bad tracke.
Do yuu went to regbter the error trackm a8 bad tracks?
To flag these tracks as bad, select
as they are flagged. When the process is complete, press [Enbrl
to return to the Hard Disk Format Menu.
Option 3, Non-destructive Surface Analysis
The Non-destructive surface analysis does not destroy any
data, and you can use it to safely check the condition of your
hard disk drive. However, this test does not flag any bad tracks
detects.
it
To start the test, select Non-destructive surface
analysis from the Hard Disk Format Menu. You see these
messages:
Analyze Hard Disk <Drive 9:~
Read/Verify
Current cylinder is nnnn
5-10
Formatting a Hard Disk
Y
check for all tracks...
. You see a list of the tracks
Advertisement
Table of Contents
