Table of Contents
Advertisement
If you want to...
enable/disable the warning message
after long-distance driving,
enable/disable speed limit alerts,
which warn you of the speed limit
on any given road,
set the speed limit alerts manually, tap Set manual speed alert to select the speed limit or turn
enable/disable a visual warning if
the screen is accessed in a moving
vehicle,
set how you want to receive the
camera and safety alerts,
Route options
If you want to...
change the navigating mode,
set route type options for your
route,
set types of road options for your
route,
Then...
tap Driver fatigue alert to turn it on or off.
ƒ tap Speed limit display to turn it on or off.
ƒ Tap Speed limit alerts and select:
○ Off: disable the speed limit alert.
○ Auto: set the system to alert automatically while
your speed is above the limit.
○ Speed limit + 5 km/h (+ 3 mph): set the system to
alert while your speed is 5 km/h (3 mph) or more
above the limit.
○ Speed limit + 10 km/h (+ 7 mph): set the system to
alert while your speed is 10 km/h (7 mph) or more
above the limit.
it off.
tap Warn me not to operate my Mio while driving to turn
it on or off.
tap Safety Camera / Mobile Safety Camera / Average
Safety Camera / Red Light Camera / Dangerous zones to
select:
ƒ No alerts
ƒ Visual alert
ƒ Visual & Audible alerts
Then...
tap Mode to select Car or Truck.
tap Route type to select your route type preference from
the list:
ƒ Fastest: The route that should be the fastest when
navigating.
ƒ Easiest: The simplest route with the least number of
turns and favours motorways where appropriate.
ƒ Economical: The route with least number of stops, turns
and urban areas which should save on fuel usage.
ƒ Shortest: The route with the shortest physical length.
tap Types of road. Select your road preference from the list.
Note: Avoiding ferry routes may prevent you from navigating
between certain countries, even when a bridge or tunnel exists.
41
Advertisement
Table of Contents
