Frigidaire GCRG3060BF Use & Care Manual page 21

Setting the Clock
When the appliance is fi rst
plugged in or when the pow-
er supply to the appliance has been interrupted,
the display will show 12:00. It is recommended to
always set the clock for the correct time of day
before using the appliance.
To set the clock:
1. Press . The colon in the displayed time will
start to fl ash.
2. Enter the correct time using the number keys.
3. Press START.
NOTE: The clock cannot be changed when the
oven is set for cooking or self clean is active.
Setting 12 Hour or 24 Hour display mode
(Hour)
The clock display mode allows you to select 12 hr
or 24 hr modes. The factory pre-set clock display
mode is 12 hours.
To set 12 hr or 24 hr display mode:
1. Press until "Hour" appears in the display.
2. Press START.
3. Press to toggle between 12 hr and 24 hr
setting.
4. Press START to accept the desired clock set-
ting.
The display returns to the settings menu. After a
few seconds, it will return to the time of day.
SETTING OVEN CONTROLS
Setting a silent control panel (Aud)
When selecting a function, an audible tone is heard
each time a key is pressed. If desired, the control
can be programmed for silent operation.
To set the controls for silent operation:
1. Press until "Audio" appears in the display.
2. Press START.
3. Press to toggle between "oFF" and "on".
4. Press START to accept when the desired set-
ting is displayed.
The display returns to the settings menu. After a
few seconds, it will return to the time of day.
Temperature display (F-C)
The electronic oven control is set to operate in
Fahrenheit (°F) at the factory. You can change it
to operate in Celsius (°C). The oven may be pro-
grammed for any temperature from 170°F to 550°F
(77°C to 288°C).
To change the temperature to Celsius (°C) or from
°C to °F:
1. Press until F-C appears.
2. Press START.
3. Press to toggle between F and C.
4. Press START to accept your choice.
The display returns to the settings menu. After a
few seconds, it will return to the time of day.
21