Audio Input - Beamz Scene Setter DMX-024PRO Instruction Manual

DIFFERENT FUNCTIONS FOR THE MIDI PROTOCOL
Switching on the MIDI input function:
1) Hold the RECORD/SHIFT button down.
2) Press three times the flash button no. 1 in the PRESET A section.
3) Release the buttons. The display shows now [Chl]
4) Select via one of the flash buttons 1 to 12 in section PRESET B the pattern to which you wish to add the MIDI file.
Switching on the MIDI output function:
5) Hold the RECORD/SHIFT button down.
6) Press three times the flash button no. 2 in the PRESET A section.
1) Release the buttons. The display shows now [Ch0].
2) Select via one of the flash buttons 1 to 12 in section PRESET B the pattern from where you wish to switch on the MIDI
output function.
Switching off the MIDI in- and output functions
1) Hold the RECORD/SHIFT button down.
2) Press the REC/EXIT button once.
3) Release both buttons. The display show now 0.00.
Downloading a MIDI control file:
1) Hold the RECORD/SHIFT button down.
2) Press three times the flash button no. 3 in the PRESET A section.
3) Release both buttons. The display shows now [IN].
4) While downloading the data, all running light functions are temporarily switched off.
5) The control protocol downloads the data from address 55Hex under the file name DC1224.bin.
Uploading a MIDI control file:
1) Hold the RECORD/SHIFT button down.
2) Press three times the flash button no. 4 in the PRESET A section.
3) Release both buttons. The display shows now [OUT].
4) While uploading the data, all running light functions are temporarily switched off.
5) The control protocol uploads the data to address 55Hex under the file name DC1224.bin.
Specifications
DMX connection 3-pin XLR
MIDI input 5-pin DIN

Audio input

RCA, 100mV - 1V (p-p)
Power Supply 12Vdc, 500mA via mains adaptor
Dimensions 483 x 264 x 90mm
Weight 4,1kg
www.tronios.com
Copyright © 2012 by TRONIOS the Netherlands