Before Operating; To Set The Clock; Stop/Clear - Blomberg BOTR24100SS User Manual

BEFORE OPERATING

4
Before operating your new microwave oven, make sure you
read and understand this operation manual completely.
Follow these steps:
1. Plug in the microwave oven. ENJOY YOUR MICROWAVE TOUCH
CLEAR will appear.
2. Touch the STOP/CLEAR pad. : will appear.
3. Set clock.

TO SET THE CLOCK

1. Touch TIMER/CLOCK two times.
.
SET CLOCK ENTER TIME
2. Touch number pads for correct time of day
3. Touch START/+30 SEC.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, ERROR will appear in the display. Touch the STOP/
CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently show
ENJOY YOUR MICROWAVE TOUCH CLEAR after the power is
reinstated. If this occurs during cooking, the program will
be erased. The time of day will also be erased. Simply
touch STOP/CLEAR pad and reset the clock.
Note: Any program can be set on the microwave oven
with the oven door open except for START/+30 SEC. The
oven can be programmed while the door is opened, but it
must be closed to begin cooking.
Over The Range Microwave Oven / User Manual
The display shows
TO

STOP/CLEAR

Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Pause the oven during timed cooking. To restart the oven,
close the door and touch START/+30 SEC.
4. Return the time of day to the display.
5. Cancel a program during cooking. Touch STOP/CLEAR
2 times to cancel timed cooking.
11 / 90 EN