Renault Clio User Manual page 98

Table of Contents

Advertisement

TRIP COMPUTER: journey parameters
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
On-board computer with mileage-
before-service message
Service in
30 000 km / 12 months
Service due in
300 km / 24 days
Service Required
Reset: to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the display
shows the mileage before service permanently.
Note: If a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.
1.84
(4/5)
Interpreting the display selected
f) Mileage before service or oil change.
Mileage before service
With the ignition on and engine not running, access the "Mileage
before service" information. When the distance value approaches its
limit, there are several possible scenarios:
– If the range is less than 930 miles (1,500 km) or one month: the
message "Service due" is displayed accompanied by the nearest
term (distance or time);
– range equal to 0 miles (0 km) or date of service reached: the mes-
sage "Service Required" is displayed accompanied by the warning
©
light
.
The vehicle requires a service as soon as possible.

Advertisement

Table of Contents
loading

Table of Contents