Table of Contents
Advertisement
Menu Navigation
The projector has multilingual on-screen display menus that allow for image and
settings adjustment.
1. To open the On-Screen Display (OSD) Menu, press the Menu/Exit button on the
projector or the remote control.
2. When the OSD is displayed, use the Navigation buttons (
in the main menu. While making a selection on a particular page, press the Enter
button on the projector or the remote control to enter a sub-menu.
3. Use the Navigation buttons (
and then press Enter to view further settings. Adjust the settings by using the
Navigation buttons (
4. Select the next item to be adjusted in the sub-menu and adjust as described
above.
5. Press Enter to confirm, and the screen will return to the previous menu.
6. To exit, press the Menu/Exit button again. The OSD menu will close and the
projector will automatically save the new settings.
) to select the desired item in the sub-menu
tu
).
tu
36
) to select any item
pq
Advertisement
Table of Contents
