Related Manuals for STODDART Woodson W.BMA22
Summary of Contents for STODDART Woodson W.BMA22
- Page 1 Specification, Installation and Operation Manual Bain Marie Models: W.BMA22, W.BMA23, W.BMA24, W.BMA25, W,BMA26, W.BMS11 & W.BML21 A guide on the use, care and maintenance of your quality Woodson product Rev: A - 08/11/2017...
-
Page 2: Table Of Contents
Troubleshooting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14 www.stoddart.com.au... - Page 3 Warranty Request Form � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17 www.stoddart.com.au...
-
Page 4: Introduction
Your New Woodson Product Thank you for choosing this quality Stoddart Woodson product� All our products are designed and made to meet the needs of food service professionals� By using, caring and maintaining your product according to these instructions, your Woodson product should give you many years of reliable service�... -
Page 5: Attention
The manufacturer declines any liability for damages to persons and/or things due and to an improper/wrong and/or unreasonable use of the machine Service • Only specifi cally trained/qualifi ed Technicians (Stoddart, one of our service agents, or a similarly qualifi ed persons) should carry out any and all repairs, maintenance and services www.stoddart.com.au Page 4 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 6: Installation
The unit is supplied with 15mm tap-style rear drain for fast and safe draining • Baine Marie must be drained DAILY to a bucket or to a tundish via a hose www.stoddart.com.au Page 5 Due to continuous product research and development,... -
Page 7: Electrical Connection
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid a hazard� Please contact Stoddart for parts and we will advise how to do this in order to avoid any electrical hazard •... - Page 8 Page Intentionally Left Blank www.stoddart.com.au Page 7 Due to continuous product research and development, the information contained herein is subject to change without notice.
-
Page 9: Specification
2.4kW 2.4kW 2.4kW Electrical Connection 10A plug & lead fitted 2005 1680 1355 1030 82 Electrical Lead Position SECTION BF-BF www.stoddart.com.au Page 8 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 10: W.bms11 / W.bml21
4 x 1/2 GN Pans Power 0.6kW 1.2kW Electrical Connection 10A plug & lead fitted 10A plug & lead fitted 82 Electrical Lead Position www.stoddart.com.au Page 9 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 11: Operation
The water in the well and the surfaces of this unit are HOT when operating. Take caution and do NOT place any part of the body in the water. www.stoddart.com.au Page 10 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 12: Gn Pans, Loading Bain Marie
When operating, the surfaces may be hot • Signage should be displayed for personal and customers to ensure no one will burn themselves www.stoddart.com.au Page 11 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 13: Cleaning
Wait until the unit has cooled to a safe temperature before undertaking any cleaning or maintenance. Contact with hot surfaces can cause burns and serious injury. www.stoddart.com.au Page 12 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 14: Cleaning Schedule
Water with high mineral content needs be filtered • When cleaning, clean the elements properly and allow to dry before switching the unit back ON www.stoddart.com.au Page 13 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 15: Troubleshooting
Unit not level Place unit of a level surface Connection seals / BSB valve broken Replace seals / BSB valve www.stoddart.com.au Page 14 Due to continuous product research and development, the information contained herein is subject to change without notice. -
Page 16: Warranty
Proper maintenance and cleaning of equipment in accordance with the Instructions is essential to the equipment’s effective operation; vii� On site warranty services are limited to sites within 50km from the nearest Stoddart authorised service agent and service agent’s reasonable travel costs must be paid by Customer prior to the commencement of the repairs;... -
Page 17: 4� Warranty Claim Procedure
Transportation costs associated with transporting the equipment to a Stoddart authorized service agent where Stoddart considers (acting reasonably) that repairs cannot be undertaken on-site; and Unless agreed to by Stoddart in writing to the contrary, warranty is not included in the sale price for goods sold to or installed in an overseas location� 4. Warranty Claim Procedure 4�1... -
Page 18: Warranty Request Form
To ensure we can provide the best possible service we require you to complete this form. Make, model and serial number, along with other essential information. To secure a call, you must also have an account with Stoddart or complete the credit card details below. - Page 19 Page Intentionally Left Blank www.stoddart.com.au Page 18 Due to continuous product research and development, the information contained herein is subject to change without notice.
- Page 20 Stoddart Sales Servicing and Replacement Sales Department Tel: 1300 791 954 Fax: (07) 3344 1000 Email: fseorders@stoddart�com�au Service & Spares Department Tel: 1300 307 289 Email: service@stoddart�com�au Email: spares@stoddart�com�au...
Need help?
Do you have a question about the Woodson W.BMA22 and is the answer not in the manual?
Questions and answers